-
2023-01-01 22:15:32+00:00
Looking for suggestions on how to automate toggling between two tunes. I have a huge spread on power rate between off peak and peak electric rates. I'd like to over clock off peak and under clock during peak. Would be super cool if this could somehow be incorporated into BraiinsOS. Curious if anyone else has a solution so I don't have to manually switch twice a day during the week.
-
2023-01-01 21:34:40+00:00
Are you still able to use BraiinsOS after updating to the new Bitmain firmware? If so, that could be a temp solution until Braiins releases versions for the currently unsupported models.
-
2023-01-01 19:45:27+00:00
Make sure your power supply model/revision is supported as well
-
2023-01-01 19:35:00+00:00
The one pictured is SD which should work with Braiins
-
2023-01-01 19:24:16+00:00
Does Braiins OS support Control Board that Bitmain sell on their website? (if I buy it and replace it with my S19 pro Amlogic one)
https://m.bitmain.com/product/18450220523100456999r2N2wUQ0066C
-
2023-01-01 14:58:58+00:00
I've been struggling, when will braiins update? Implement "non pic mode" ? :P
-
2023-01-01 14:58:05+00:00
Yeah sorry, just very important info to have..
-
2023-01-01 14:57:17+00:00
Eric, i have changed from Amlogic to xilinx and i have several firmwares from BITMAIN which are not publicly released, none of them worked to BOOT from SD. I used the oldest SD restore file from 2020 and got it working. But not with braiins yet.
-
2023-01-01 14:57:09+00:00
No shilling rule.
-
2023-01-01 14:56:35+00:00
Braiins OS+ support only, avoid mentioning any others.
-
2023-01-01 10:49:42+00:00
happy new year to all, my dearest wish for this new year is to finally have a firmware for the S19 with an AMlogic card
-
2023-01-01 06:00:06+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-02 06:00:02+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-02 03:42:00+00:00
No, he was just waiting for the next block to confirm a transaction...
-
2023-01-02 03:17:44+00:00
Nice if so
-
2023-01-02 02:28:46+00:00
Did u find block while u mining?
-
2023-01-02 01:25:50+00:00
Good night!
-
2023-01-02 01:23:40+00:00
Thank you guys all
-
2023-01-02 01:23:32+00:00
I had a good time here, it was funny :D
-
2023-01-02 01:22:59+00:00
My tx passed
-
2023-01-02 01:22:53+00:00
I CAN GO TO SLEEP
-
2023-01-02 01:22:50+00:00
FINALLY BITCOIN BLOCK
-
2023-01-02 01:21:24+00:00
As I know amlogic not garbage, but on android or something like that
-
2023-01-02 01:21:02+00:00
When there is BraiinsOS AmLogic board support, will we have these kind of problems there too, or are those a bit more robust?
-
2023-01-02 01:20:57+00:00
Hey, if you know C++ go for it
-
2023-01-02 01:20:39+00:00
Assembler time xDDD
-
2023-01-02 01:20:24+00:00
for this there is no problem
-
2023-01-02 01:20:10+00:00
I’ll start a BBB on fire yet
-
2023-01-02 01:20:08+00:00
yeah, you need to use simpler commands
-
2023-01-02 01:19:44+00:00
I just asked the same...but
https://t.me/BraiinsOS/141007
-
2023-01-02 01:19:42+00:00
Just write a looping bash script to check the time, put it in init.d as a startup task, and voila
-
2023-01-02 01:19:20+00:00
Bash script time
-
2023-01-02 01:19:15+00:00
nope.. haha, that was mentioned above...
-
2023-01-02 01:19:14+00:00
Ffs.
-
2023-01-02 01:19:06+00:00
No
-
2023-01-02 01:18:59+00:00
BBB still has cron right?
-
2023-01-02 01:18:51+00:00
Just do it locally with cron I think
-
2023-01-02 01:18:36+00:00
Not at all. Got excited like it could work.. then no, then yes... haha
-
2023-01-02 01:18:28+00:00
I agree, I find it much easier than the whole grep thing, but I’m just lazy and hate regex
-
2023-01-02 01:18:05+00:00
Sorry, technical stupidity
-
2023-01-02 01:18:02+00:00
for swapping config files around just use mv or cp, no need to actually copy files from remote
-
2023-01-02 01:17:49+00:00
Holy shit, I step away to start making some bacon and these last posts are like a roller coaster ride... haha!
-
2023-01-02 01:17:49+00:00
If there’s a way to make it work you just pipe traffic?
-
2023-01-02 01:17:34+00:00
I get BBB is garbage, but like
-
2023-01-02 01:17:24+00:00
But… if you can send a file with a fake version… what
-
2023-01-02 01:16:56+00:00
Crappy cpu
-
2023-01-02 01:16:52+00:00
Is not that, it's the hardware limitations
-
2023-01-02 01:16:16+00:00
I’m honestly so surprised BBB has no SCP, I wonder if you could implement a pseudo version locally on the miner that would work with external SCP but uses SSH, I assume someone somewhere has done this…
-
2023-01-02 01:14:38+00:00
It’s fine, just ssh, open a reverse shell, write out from there, easy lol
-
2023-01-02 01:14:32+00:00
BBB doesn't have scp?..
-
2023-01-02 01:14:10+00:00
But anyway there is alternatives that can put passwords in commands
-
2023-01-02 01:14:04+00:00
Ah true, damn BBB
-
2023-01-02 01:13:58+00:00
ah you can't use scp, there is a trick we call "pseudo scp" involving ssh
-
2023-01-02 01:13:53+00:00
Nope in the BBB
-
2023-01-02 01:13:48+00:00
That’s my favorite pastime ;)
-
2023-01-02 01:13:36+00:00
Hope BBB have key access
-
2023-01-02 01:13:25+00:00
Make sure to use absolute paths with this
-
2023-01-02 01:12:58+00:00
You have lots of options from ubuntu desktop, my favorite is actually using a whole new config file. The bosminer config is at /etc/bosminer.toml, so if you make 2 copies of that, say one for before noon and one for afternoon, then you can just replace them and restart bosminer.
Locally you can do cp config_to_use.toml /etc/bosminer.toml && /etc/init.d/bosminer restart, or remotely you can use scp with scp config_to_use.toml root@IP_addr:/etc/bosminer.toml && ssh root@IP_addr “/etc/init.d/bosminer restart”
-
2023-01-02 01:11:01+00:00
Yeah no need to reinvent the wheel 😊
-
2023-01-02 01:10:13+00:00
It already is already on 24/7 to do other stuff... haha
-
2023-01-02 01:09:55+00:00
But yes you can
-
2023-01-02 01:09:51+00:00
Your desktop should be always turned on, and its consumes more power than small rpi
-
2023-01-02 01:09:31+00:00
You’ll learn, that’s what it’s about
-
2023-01-02 01:09:22+00:00
Yes you can do that
-
2023-01-02 01:09:18+00:00
just firing off ideas, i'm in kindergarten, you all are in college... haha
-
2023-01-02 01:09:14+00:00
Or pyasic and python ;)
-
2023-01-02 01:08:13+00:00
why couldn't I do this from my ubuntu desktop?
-
2023-01-02 01:07:41+00:00
Thank you @Sarieru @Chwi12 @b_Rowan and @Artemis3v
-
2023-01-02 01:06:50+00:00
That's a good idea
-
2023-01-02 01:06:24+00:00
send the commands from there using the cron of it
-
2023-01-02 01:05:51+00:00
get a linux device like a raspberry pi
-
2023-01-02 01:05:31+00:00
Will keep my eyes out for a couple new control boards, but doesn't make sense to stick money into hardware at the moment.
-
2023-01-02 01:04:51+00:00
For the moment
-
2023-01-02 01:04:50+00:00
That's the best thing
-
2023-01-02 01:04:23+00:00
Okay, well will try this tomorrow to see how it flips between the tunes.
-
2023-01-02 01:04:00+00:00
and the commands you quoted are obsolete, you can't use psu_power_limit anymore it changed
-
2023-01-02 01:03:44+00:00
But schedule is a whole different thing
-
2023-01-02 01:03:23+00:00
It should remember the profile yes
-
2023-01-02 01:03:05+00:00
with bbb you can't schedule changes you would need to do it from another machine and send ssh commands
-
2023-01-02 01:02:40+00:00
Shitty cb
-
2023-01-02 01:02:33+00:00
Will it remember two tune profiles? for example If I set I tune it for 2,000w let the auto tuner run and then tune for 3,600w and let the tuner run... If I go back to 2,000w will it remember the 2,000w tune or auto tune again?
-
2023-01-02 01:02:07+00:00
no its sh
-
2023-01-02 01:01:50+00:00
Let me reverify that but for what I know it's pretty lite
-
2023-01-02 01:01:43+00:00
Does it even have bash?
-
2023-01-02 01:01:36+00:00
Oh my God
-
2023-01-02 01:01:33+00:00
Ahahahha
-
2023-01-02 01:01:32+00:00
Ahahah, srsly????
-
2023-01-02 01:01:22+00:00
It doesn't have Cron
-
2023-01-02 01:01:07+00:00
BBB doesn't have ssh?
-
2023-01-02 01:00:59+00:00
Goodnight friend and thank you. happy new year
-
2023-01-02 01:00:57+00:00
BBB runs a lite version of Braiins OS+
-
2023-01-02 01:00:47+00:00
Well for both machines they are. Crap.
-
2023-01-02 01:00:42+00:00
I'd help you out for free, but I have to go sleep, I'm awake too long
-
2023-01-02 01:00:35+00:00
Then is not possible
-
2023-01-02 01:00:24+00:00
shit, its a BBB
-
2023-01-02 01:00:11+00:00
haha
-
2023-01-02 01:00:04+00:00
Oh my. You are amazing!
-
2023-01-02 00:59:54+00:00
I'm running Ubuntu
-
2023-01-02 00:59:39+00:00
Oh, I forget, windows now can ssh
-
2023-01-02 00:59:38+00:00
This can be easily install if the control board is not BBB
-
2023-01-02 00:59:24+00:00
From there the instructions are the same
-
2023-01-02 00:59:12+00:00
No need
-
2023-01-02 00:59:07+00:00
Well I'm in on Terminal per Brett's instructions
-
2023-01-02 00:58:59+00:00
It doesn’t matter, it just can make it a bit simpler.
-
2023-01-02 00:55:58+00:00
Well just installed putty... Is Putty a better interface for doing this?
-
2023-01-02 00:52:40+00:00
Don’t even need putty technically, just command prompt, ssh root@IP_addr, then you can run the commands in that shell.
-
2023-01-02 00:51:34+00:00
On it now...
-
2023-01-02 00:50:55+00:00
I'm sure this would benefit others here as well...
-
2023-01-02 00:50:52+00:00
Install Putty, go to SSH, enter your miner IP, then enter password, then copy & paste this commands. Then go system-system and set timezone. If you want to edit just go to system-scheduled tasks
-
2023-01-02 00:47:57+00:00
I need a little help with the command line and building this. 50,000 sats for somebody who can help walk me through this.
-
2023-01-02 00:45:42+00:00
Hi, you can add the commands like this to scheduled tasks, you need to set your own proper PSU power limit and times:
0 9 * * * sed -i 's/^psu_power_limit = .*/psu_power_limit = 960/' /etc/bosminer.toml && /etc/init.d/bosminer restart
0 21 * * * sed -i 's/^psu_power_limit = .*/psu_power_limit = 1280/' /etc/bosminer.toml && /etc/init.d/bosminer restart
If you want to have your own scheduled timing you can create your own here: https://crontab.guru/
Also navigate to System > System and set the device time zone to your proper time zone
-
2023-01-02 00:36:04+00:00
Would love to chat with someone who has this set up and working
-
2023-01-02 00:35:14+00:00
It’s pretty easy, `crontab -e' opens crontab to edit, then you set some timing information and the command to run in that text file.
-
2023-01-02 00:34:29+00:00
Thanks I'll take a look. Might an opportunity to learn some script stuff which is now out of my league...
-
2023-01-02 00:33:30+00:00
I’m sure there’s a script for a cron job, which is just a timed job, that would do this for you in here somewhere. Just search the chat for cron
-
2023-01-01 23:24:31+00:00
You can ask @altairtechnology they sell control boards in the US with Braiins os+ on it! 😉
-
2023-01-03 22:19:55+00:00
I cleared the cache, deleted cookies but without success. Even in private mode without cache and cookies it has the same problem. I installing macOS on a virtual machine to look how it goes on a clean install but I am pretty shure it will looks the same. Feels a little bit like you gaslighting me that I am causing the problem.
-
2023-01-03 22:00:46+00:00
Support issues only here
-
2023-01-03 22:00:37+00:00
Apple horrible
-
2023-01-03 21:54:08+00:00
This is an Apple support issue, so if this doesn't work for you, I'm sorry but you will have to use either Firefox or Chromium that we know (and you as well) it works fine. Braiins OS+ is not heavily tested for Safari.
-
2023-01-03 21:53:15+00:00
"Quick tip: If the steps above don't empty your cache, try adjusting screen time restrictions and stop using iCloud sync before doing them again."
-
2023-01-03 21:52:18+00:00
https://www.businessinsider.com/guides/tech/how-to-clear-cache-on-safari-browser
-
2023-01-03 21:51:30+00:00
"Tap "Clear History and Website Data" in the Safari settings."
-
2023-01-03 21:48:33+00:00
And yeah, expect this whenever you update again. Its easier to just use a different browser you can easily know how to clear its cache, or find the mystery of how to do it in Safari.
-
2023-01-03 21:47:14+00:00
or you can change the ip address so that the browser stops trying to cache the page
-
2023-01-03 21:46:08+00:00
because your browser is very stubborn with the cache, it will eventually forget it on its own.
-
2023-01-03 21:42:28+00:00
I using safari on all of my machine and it worked fine till the update from 22.06 to 22.08 to 22.08.1
-
2023-01-03 21:31:22+00:00
ok i suggest you just use firefox or chromium in those devices as well.
-
2023-01-03 21:30:59+00:00
Cleared browser history on every machine -> same.
-
2023-01-03 21:29:44+00:00
Anyway when we say clear the browser cache, you must find out how, it is needed whenever you change the firmware of a miner
-
2023-01-03 21:28:55+00:00
We are not exactly Apple support here, but:
Tap the bookmark button, then tap the History button.
Tap Clear in the bottom-right corner, then choose how much of your browsing history to clear.
-
2023-01-03 21:28:02+00:00
I cleared the cache already (development menu) but still have the same problem on two Mac and on one iPhone.
-
2023-01-03 21:27:58+00:00
What a little online search provides...
-
2023-01-03 21:27:41+00:00
[OPTION] + [COMMAND] + [E]
-
2023-01-03 21:26:39+00:00
Then you need to find out how to clear the browser cache in Safari, if its easier for you just install Firefox or Chromium.
-
2023-01-03 21:26:16+00:00
Edge is working fine on my windows machine.
-
2023-01-03 21:25:58+00:00
You tell me I can't configure Braiins OS+ via Safari and I have to use another browser. Before the update it was working fine with safari.
-
2023-01-03 21:25:02+00:00
Edge is Chromium based btw...
-
2023-01-03 21:23:32+00:00
Clear your browser cache, if you use chromium based switch to firefox based or vice versa
-
2023-01-03 21:22:38+00:00
Cmd + shift + r
-
2023-01-03 21:19:25+00:00
Same problem on 22.08.1 and if refresh the site it switches to light mode. WTF? Only with Edge on Windows its working as usual.
-
2023-01-03 21:17:42+00:00
Is there any test results of S19JPros optimal tuning settings for Braiins OS+? When running S19JPro96 at minimum of 1616W I see constant shutdowns of hashing.
-
2023-01-03 21:17:01+00:00
Now you can update again to the latest.
-
2023-01-03 21:15:42+00:00
The support told me i should update to 22.08
-
2023-01-03 21:06:59+00:00
did you try updating to the latest Braiins OS+ version ( 22.08.1 ) ?
-
2023-01-03 21:05:58+00:00
22.08 Problems started after the update. Cleared the cache and deleted cookies but system site not working on safari macOS/iOS.
-
2023-01-03 21:03:44+00:00
?
-
2023-01-03 21:03:43+00:00
Whats the firmware version
-
2023-01-03 21:02:27+00:00
Am I the only one with these problem?
-
2023-01-03 20:52:52+00:00
Please send me DM
-
2023-01-03 20:30:05+00:00
I checked the web version and it all seems to be mining correctly
-
2023-01-03 18:56:49+00:00
thanks
-
2023-01-03 18:56:34+00:00
ok
-
2023-01-03 18:56:28+00:00
drain://x
-
2023-01-03 18:56:26+00:00
yeah
-
2023-01-03 18:56:16+00:00
do i just write
-
2023-01-03 18:55:56+00:00
after you have plenty of urls of your main pool, add that at the bottom
-
2023-01-03 18:55:36+00:00
what is url?
-
2023-01-03 18:55:36+00:00
yeah add more, there is no limit
-
2023-01-03 18:55:26+00:00
so add a third pool? hat is full url
-
2023-01-03 18:55:21+00:00
your choice
-
2023-01-03 18:54:35+00:00
wattage is 650
-
2023-01-03 18:54:13+00:00
it is pointless to directly change the fan speed, what for?
-
2023-01-03 18:53:58+00:00
make sure you add a pool at the bottom called drain://x
-
2023-01-03 18:53:55+00:00
but now i see the fan speed is greyed out
-
2023-01-03 18:53:44+00:00
and the watts you intend to release into the room...
-
2023-01-03 18:53:18+00:00
target at your choice, the rest no need to change
-
2023-01-03 18:53:01+00:00
target at 80, hot at 90
-
2023-01-03 18:52:48+00:00
Okay so i have switched to auto
-
2023-01-03 18:50:45+00:00
You should leave it to auto and just change the target and the power
-
2023-01-03 18:48:44+00:00
what should i aim for as regards chip temperature?=
-
2023-01-03 18:48:16+00:00
now playing with manual fan speed - down to 20% and the chip temp is stable at 56 C
-
2023-01-03 18:47:09+00:00
i have underclocked with a wattage of 650W
-
2023-01-03 18:46:43+00:00
setting it up as a room heater 😁
-
2023-01-03 18:46:17+00:00
hi just playing with the configs on my S9
-
2023-01-03 17:00:51+00:00
sorry mate, deleted
-
2023-01-03 16:53:17+00:00
this group is for Braiins OS+ support, please stay on topic
-
2023-01-03 16:44:26+00:00
yea i test it now
38-50 temp chips with 110th s19jpro i get 2900~ power consumption
in text file i see that "Rony" achieved 19j Pro 104 doing 104TH/s 2542W (24.4 J/TH) 65C any ss or etc?
-
2023-01-03 14:55:58+00:00
@Pdecker1 please check your dm 😊
-
2023-01-03 13:17:25+00:00
🥈
-
2023-01-03 12:05:38+00:00
👍
-
2023-01-03 11:53:31+00:00
Only English in here, if you can manage to speak Spanish you can go in here https://t.me/BraiinsOS_ES
-
2023-01-03 11:53:22+00:00
Yes, 8" AC infinity on the exhaust side. S19 jPro 92T machine w/BBB CB.
-
2023-01-03 11:37:49+00:00
Algum brasileiro online ai?
-
2023-01-03 11:16:35+00:00
Yes, you can set Target, Hot, Dangerous Temprature, Here is the documentation
-
2023-01-03 11:13:46+00:00
For example i can set target temp 50°?
-
2023-01-03 11:13:28+00:00
Do you have firmware with this option?
-
2023-01-03 11:04:59+00:00
If you read the article above, the most important thing is keeping the temperature steady during the tuning process and after getting Stable. The chart is showing the range for temperature, in X19 series after a certain temperature it is not efficient
-
2023-01-03 11:04:57+00:00
also the old s19 ASIC boards were produced on textolite
new one on aluminum board
-
2023-01-03 11:03:30+00:00
or waterblocks with water and radiator
-
2023-01-03 11:03:11+00:00
So we need to use cold air for example
-
2023-01-03 11:02:34+00:00
There are a lot of results from our community users, check this file 👍🏼
-
2023-01-03 11:01:41+00:00
is that real to make power less than stock j/th
and less temp is okey for chips?
-
2023-01-03 11:01:24+00:00
Do anyone make video test for this power consuption?
-
2023-01-03 07:02:28+00:00
Are these fans being pushed by some external means like an inline duct fan?
Don't forget to tell me the miner model and factory speed to update the list.
-
2023-01-03 06:00:34+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-03 04:31:30+00:00
https://braiins.com/blog/impact-of-temperature-on-efficiency-of-antminer-x19s
-
2023-01-03 04:29:10+00:00
It is, we have a report mentioning that heat is impacting performance on this models
-
2023-01-03 03:30:07+00:00
I think the cold air is the advantage.
-
2023-01-03 03:17:12+00:00
Set at 2kw
-
2023-01-03 03:16:49+00:00
what power setting ya at TB? I am starting to drop my power setting a bit. Got my WM at 27w/th which I am happy with. The AM got be 25 or less.
-
2023-01-03 02:25:08+00:00
Ope, toggling back and forth to 6.9amps after watching for a bit
-
2023-01-03 02:22:29+00:00
1,632w/74Th = 22.05w/Th
-
2023-01-03 02:22:00+00:00
6.8amps x 240v = 1,632w
-
2023-01-03 02:21:05+00:00
@Artemis3v How's this look? Low power tune complete...
-
2023-01-04 19:35:54+00:00
Thanks everyone
-
2023-01-04 19:31:35+00:00
Please stay on topic, this is Braiins OS+ support
-
2023-01-04 19:30:51+00:00
I'm curious what fan if you're willing to share
-
2023-01-04 19:30:01+00:00
That's awesome, thanks glad I asked the question, great I'm going to order those fans then.
Thanks
-
2023-01-04 19:26:49+00:00
If they are 4 wire PWM fans they should be fine. When you first start the system it spins the fans to max to find out the limit of your installed fans. If your fans only spin to 4k max then that will be discovered by the software. If they go to 7k, that would also be discovered and used as the 100% fan speed value by the software. It adapts.
-
2023-01-04 19:19:45+00:00
Is that hint saying that braiins update for XP is coming soon!🙏
-
2023-01-04 19:02:07+00:00
Have some patience, you will soon™ be able to do it with Braiins OS+.
-
2023-01-04 19:00:21+00:00
So I don't want to turn off the fans, i want to use a different axial fan, i found a thicker fan that will provide a 50% increase in air flow, at a reduced rpm, so that is my concern. The motor will not reach 6k rpm, is the software going to trigger that as an issue a prevent hashing. Trying to find ou before I spend the money and buy these 4 fans
-
2023-01-04 18:11:06+00:00
@Hugh Mancilla No as you can turn fans off in software
-
2023-01-04 18:09:47+00:00
Test
-
2023-01-04 17:48:11+00:00
If you change the fans to inlines you will need fan spoofers
-
2023-01-04 17:38:39+00:00
I realize you don't support the is software but I figured you guy's have the expertise to tell me if there is going to be an issue
-
2023-01-04 17:28:20+00:00
So does that mean the factory is Will see it as a problem?
-
2023-01-04 17:25:22+00:00
It won't be a problem with Braiins OS+, we don't have support for other fw.
-
2023-01-04 16:25:27+00:00
Hi everyone, while I'm patiently a waiting for s19 XP on braiins I had a question about the stock firmware I'm hoping can be answered.
I would like to upgrade the stock fans to a fan that has greater CFM but the fans max rpm will be different, will the stick BT firmware prevent it from hashing with different fan's that run at lower or higher rpm?
-
2023-01-04 10:14:13+00:00
Roger that. I noticed that is has 126 chips/bord instead of 76 like the other x19 that I have worh braiin os. Looking forward for the new release. Cheers!
-
2023-01-04 10:12:12+00:00
Not supported yet, changing CB doesn’t help
-
2023-01-04 10:04:45+00:00
Send a photo from PSU sticker
-
2023-01-04 10:04:35+00:00
It is important you check the PSU which is only way to identify the hardware type
-
2023-01-04 10:02:52+00:00
That’s fine
-
2023-01-04 09:59:34+00:00
This is xillinx also okey for s19
-
2023-01-04 09:55:07+00:00
With*
-
2023-01-04 09:54:59+00:00
I have this one wit sd card
-
2023-01-04 09:39:11+00:00
Buy a beaglebone one
-
2023-01-04 09:38:45+00:00
No
-
2023-01-04 09:33:15+00:00
Hello. Can you tell me please if I can install braiin os on this s19pro
-
2023-01-04 08:31:22+00:00
Good to know thanks!
-
2023-01-04 08:26:56+00:00
You can use Braiins OS+ default for first run, then manage them by changing power limit and temperature settings according to your environment and cooling system
-
2023-01-04 08:26:06+00:00
Keep them cool as you can. the X17 series don’t have a good quality
-
2023-01-04 08:21:42+00:00
What is the hottest temps advised vs ideal temps for S17 pro. For example, the default I think is 82c orange/warning and 92c thermal protection shutdown? I believe this is default stock for the s17 pro, but in braiins there is the option to change these settings and I'm wondering if by bumping these slightly I could increase my power a bit more to squeeze the last bit of perf/th out of it.
-
2023-01-04 06:44:29+00:00
For X19 it can take about 12 hours
-
2023-01-04 06:13:41+00:00
How long does the auto tuning take normally?
-
2023-01-04 06:13:33+00:00
Please send support file for any case needs more investigation
-
2023-01-04 06:12:51+00:00
Is there someone who can help with this or should I send in a support ticket?
-
2023-01-04 06:00:36+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-04 02:44:35+00:00
Im just getting this spinning. Its a BB with APW12 psu
-
2023-01-04 02:38:50+00:00
yes
-
2023-01-04 02:38:48+00:00
I have a BB and all i see is this on my dashboard
-
2023-01-04 02:37:44+00:00
Is this one ok
-
2023-01-04 02:30:28+00:00
did the new psus ever get firmware for them?
-
2023-01-04 01:06:33+00:00
Lates version and the new URL should get the BOS+ reward in the next block
-
2023-01-04 01:05:19+00:00
AntMiner S9 Miner Control Board / 2022-09-27-0-26ba61b9-22.08.1-plus
-
2023-01-04 01:03:56+00:00
Whats the version that you are using ?
-
2023-01-04 01:03:22+00:00
Then this happens...
-
2023-01-04 00:56:24+00:00
You need to switch to the new urls, those that say braiins.com instead of slushpool.com as explained here.
-
2023-01-04 00:54:22+00:00
But there remains the problem with the Braiins OS+ reward. The support told me to do the update and use the braiins url instead of the slush url. But if I do that I don't get Braiins OS+ reward.
-
2023-01-04 00:44:54+00:00
Or you can install either Chromium or Firefox configure the miner if it needs to and let it hash. Actually, you can do that from your windows machine.
-
2023-01-04 00:22:31+00:00
I already did that. But they didn't help. The main problem of the ticket was that I don't get Braiin OS+ reward. The support told me to update to 22.08.1 and now I have the this new problem. All in all, a complete failure.
-
2023-01-04 00:14:34+00:00
I think you can open ticket on site
-
2023-01-04 00:09:59+00:00
Safari uses Webkit engine, which is only used in a few open source browsers like Midori, it has nothing to do with Chromium and its Blink engine or Firefox Gecko engine.
-
2023-01-04 00:04:38+00:00
Will Braiins take care of this or is this now a permanent condition? You tell me to use a chromium browser. Safari is also based on chromium. After all, Safari is the second most widespread browser on the web.
-
2023-01-03 23:49:57+00:00
Fine, then don't use Safari since its clearly broken with it.
-
2023-01-03 23:22:08+00:00
Its the same problem on a clean install. I tried it right now. It is not a cache problem!
-
2023-01-05 19:41:46+00:00
Oh damn.. Thank you
-
2023-01-05 19:41:25+00:00
This feature is only for X17 and X19 models
-
2023-01-05 19:40:41+00:00
Hello. I cant switch to Hashrate Target on my S9. Im on 22.08.1. Whats wrong pls?
-
2023-01-05 18:56:31+00:00
You can open a ticket about it, here is Braiins OS+ support only, this is a pool subject
-
2023-01-05 18:55:05+00:00
I'll get the reward for the last 8 blocks but now it stoped rewarding me again.
-
2023-01-05 18:51:59+00:00
You can use slushpool urls and see if that fixes that because it’s weird that you have 22.08.1 and Braiins urls and is not giving you the Braiins OS+ rewards
-
2023-01-05 18:50:39+00:00
22.08.1 with Braiins URLs
-
2023-01-05 18:50:05+00:00
Do you have the 22.08 ?
Do you have Braiins or slushpool urls ?
-
2023-01-05 18:49:17+00:00
Worked for a while but again no Braiins OS+ reward.
-
2023-01-05 16:29:04+00:00
Ok thanks, I could be wrong about the chip count. Will take a pic when I get home later and report back. Thanks,
-
2023-01-05 16:28:11+00:00
could be another one in the side
-
2023-01-05 16:27:57+00:00
next to where you plug the ethernet unless you removed that metal cover it has the sticker
-
2023-01-05 16:27:22+00:00
S19a Pro with 114 chips per hashboard is rated 110T
-
2023-01-05 16:27:19+00:00
Where’s the psu sticker located usually
-
2023-01-05 16:26:04+00:00
miner model not psu
-
2023-01-05 16:25:49+00:00
hmm
-
2023-01-05 16:25:24+00:00
It’s an S19a Pro 110Th. Pic of psu sticker:
-
2023-01-05 16:22:38+00:00
I just see S19a with 76 chips (there is a 100T rated model) and S19a Pro with 114 chips. The S19a (not pro) is currently unsupported as far as i know.
-
2023-01-05 16:22:36+00:00
Good to go thank you!
-
2023-01-05 16:15:52+00:00
Bitcoin Mining Setup on Braiins Pool ★
-
2023-01-05 16:15:12+00:00
Do you have a link to the new URLs? Or I can hunt them down ty
-
2023-01-05 16:14:24+00:00
correct
-
2023-01-05 16:14:16+00:00
oh just don't specify a version this time
-
2023-01-05 16:14:01+00:00
there are no more auto updates
-
2023-01-05 16:13:52+00:00
open bos-toolbox, go to the INSTALL tab, point to the miner/s you need to upgrade
-
2023-01-05 16:13:40+00:00
Ok I'll wait and see when it auto updates
-
2023-01-05 16:13:18+00:00
after you have 22.08.1 installed
-
2023-01-05 16:12:57+00:00
ok so just put braiins pool URLs in and wait
-
2023-01-05 16:12:55+00:00
just do it
-
2023-01-05 16:12:45+00:00
it will on its own
-
2023-01-05 16:12:37+00:00
How do I get it to update to 08.1?
-
2023-01-05 16:12:27+00:00
no need to specify version
-
2023-01-05 16:12:17+00:00
Ok. Do I upgrade as I did earlier? Bos Toolbox > install > Type 22.08.1 in the Firmware version field?
-
2023-01-05 16:11:10+00:00
you are getting ready for future upgrades
-
2023-01-05 16:10:41+00:00
yes you need those with older version including 22.08
-
2023-01-05 16:10:27+00:00
oh yes I have slushpool still
-
2023-01-05 16:10:16+00:00
with 22.08.1 you need switch to the braiins.com pool urls instead of slushpool.com
-
2023-01-05 16:09:24+00:00
yeah, but you needed 22.08 first so its good
-
2023-01-05 16:08:57+00:00
Do you mean there is another update I need to do?
-
2023-01-05 16:08:38+00:00
ok if all works then you can do the final upgrade from bos-toolbox
-
2023-01-05 16:08:12+00:00
So weird. I don't think the restore from backup worked but now everything is looking normal and it still says Version: 2022-09-13-0-11012d53-22.08-plus
-
2023-01-05 16:07:33+00:00
the restore is putting things that have changed so
-
2023-01-05 16:07:14+00:00
well now you know 😊
-
2023-01-05 16:06:57+00:00
I know you said that after I did it though =P
-
2023-01-05 16:06:30+00:00
again, don't use the backup/restore function
-
2023-01-05 16:06:21+00:00
Didn’t see an answer to the above, anybody know?
-
2023-01-05 16:06:08+00:00
Bump
-
2023-01-05 16:05:59+00:00
Jumped over to a new browser and logged in (though it's still working on the backup) and I still see those same errors...hard to say if that's because we're restoring from backup
-
2023-01-05 16:05:55+00:00
if its too messed up i guess just reflash the sd card from a pc
-
2023-01-05 16:03:56+00:00
Will upgrade again after backup finishes rebooting
-
2023-01-05 16:03:45+00:00
It sure looked like it sorry
-
2023-01-05 16:03:20+00:00
when you upgrade the config is not lost
-
2023-01-05 16:03:03+00:00
Ugh too late =(
-
2023-01-05 16:02:44+00:00
yes, and don't use the backup restore function either, it can lead to problems.
-
2023-01-05 16:02:24+00:00
Sorry I logged in and out and it was still messing up so I just restored you think it's just browser?
-
2023-01-05 16:01:40+00:00
Clear the browser cache.
-
2023-01-05 16:00:49+00:00
I am going to restore from 2022-05-09 backup I made...oof
-
2023-01-05 15:56:10+00:00
I have always swapped fans willy nilly... Don't have s19s but the 17 with older firmware isnworming with some 38cm.deep delta branded fans I have
-
2023-01-05 15:51:37+00:00
What should I do?
-
2023-01-05 15:47:56+00:00
go to the configuration page and see if your settings are ok, then save and apply
-
2023-01-05 15:47:09+00:00
After upgrade I logged in and saw these errors
-
2023-01-05 15:36:36+00:00
anytime
-
2023-01-05 15:36:29+00:00
Thank you for all your help!
-
2023-01-05 15:36:21+00:00
yes
-
2023-01-05 15:35:23+00:00
And can I ignore "Post-Upgrade: Path to directory with stage3.sh script" ?
-
2023-01-05 15:34:43+00:00
you can check the "Keep hostname", its just for the name of the device on your local network ( if you changed it before it going to keep it )
-
2023-01-05 15:33:36+00:00
And how about this? Should I switch it to keep the miner hostname? I think "Don't keep" was set by default which seems wrong? Not sure what that is thank you
-
2023-01-05 15:08:13+00:00
yes
-
2023-01-05 14:44:02+00:00
If I leave the optional fields blank will it keep my current settings? (Password, power limit, pool user)
-
2023-01-05 14:30:58+00:00
If the Braiins OS+ on your device is older than 22.05 you need to proceed the upgrade process with n two steps, because of major changes in 22.08 first update to 22.08 and then the latest version.
Check these messages:
https://t.me/BraiinsOS/139600
-
2023-01-05 14:30:58+00:00
-
2023-01-05 14:30:14+00:00
Thank you
-
2023-01-05 14:30:04+00:00
Ok, you can use bos-toolbox to update
-
2023-01-05 14:29:42+00:00
Oh ok it’s not beaglebones I know that. Whatever one was compatible with your first firmware for S 19 pro.
-
2023-01-05 14:29:36+00:00
And what model are
-
2023-01-05 14:29:10+00:00
Control board
-
2023-01-05 14:28:30+00:00
Auto updater never works ><
-
2023-01-05 14:28:09+00:00
CB?
-
2023-01-05 14:28:03+00:00
Version: 2022-01-26-0-c88c581c-21.12.1-plus
-
2023-01-05 14:25:10+00:00
What Braiins OS+ version and CB your miners have ?
-
2023-01-05 14:24:53+00:00
You can update with bos-toolbox
-
2023-01-05 14:24:14+00:00
In the past, I've downloaded these .tar.gz files and uploaded them via web UI to update my firmware. Now the files for the latest version are different (disc file for SD card?). We have miners in immersion tanks so pulling out the SD card would suck. The question is has something changed or was it always risky? And can I still update from UI using the different file type for this latest update? is it the disc file? S19 pro. Thx
-
2023-01-05 10:09:25+00:00
graphQL is available after 21.09 and higher
-
2023-01-05 06:00:38+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-05 05:01:25+00:00
Graphql api included in them? Or are they older?
-
2023-01-05 04:59:26+00:00
Depends on the version, how can I help?
-
2023-01-05 03:47:52+00:00
From what I can gather by searching, it seems this version may now be supported. If that’s true, would I download the regular x19 sd card release? (Not the beaglebone?)
-
2023-01-05 03:29:49+00:00
Hey there, is the s19a with 100chips per board supported yet? PSU is APW121215a version
-
2023-01-05 02:06:50+00:00
That’s good news… all new S19 going to market are coming with those boards now…
-
2023-01-05 01:49:13+00:00
Not yet, but they are in final tests
-
2023-01-05 01:49:10+00:00
Seems like it, feeds still identifies am1-s9, am2-s17, and am3-BBB
-
2023-01-05 01:47:41+00:00
Hi 👋🏼 is there an ETA for Amlogic compatible fw ?
-
2023-01-05 01:12:57+00:00
Are am1 and am2 firmware versions still used? Or is that an older flavor?
-
2023-01-06 22:42:49+00:00
You can overclock them but we've found that underclocking in immersion seems to be the best efficiency play.
-
2023-01-06 22:13:44+00:00
Any pictures or knowledge of what S19JPROs hash at in immersion?
-
2023-01-06 21:42:44+00:00
ok thank you
-
2023-01-06 21:39:19+00:00
Check dns and network, if other devices are working fine on the same site with Braiins OS+ can NOT be Braiins OS+ issue
-
2023-01-06 21:37:46+00:00
pool address showing dead on this miner (working fine in all other miners)
-
2023-01-06 21:31:34+00:00
That is only a warning
-
2023-01-06 21:18:54+00:00
Hi, what could be the cause of the following mssg, thank you
Caused by:
daemon.err bosminer[1809]: failed to lookup address information: Try again
daemon.err bosminer[1809]: Dec 10 23:21:09.695 WARN bosminer::client::stratum_v2: dev-fee:stratum2+tcp://bdf_000.K7Qo2x3lAEoA_wYA@btc.foundryusapool.com: Connection attempt error, attempt #1, next in: 100ms
daemon.err bosminer[1809]:
-
2023-01-06 15:46:26+00:00
👌
-
2023-01-06 15:46:03+00:00
the ones they come with
-
2023-01-06 15:43:30+00:00
For XP, what control boards and psu are you targeting?
-
2023-01-06 15:34:07+00:00
** Braiins OS+ works with: **
Bitmain Antminer S9, S9j, S9i.
🚫 No: Hydro, K, SE; dual/pro mod.
Control board C41. Only slots 6,7,8.
🚫 No: C92 (T9+), C32 (Cyclone), C5 (BB).
⚠️ Unsupported: T9+, R4 (C41 only), no temps, 1200W max.
Bitmain Antminer S17, S17 Pro, S17+, S17e; T17, T17+, T17e.
Control boards C52, C49. Only slots 0,1,2.
🚫 No: Aftermarket (not Bitmain) control boards.
Bitmain Antminer S19, S19 Pro, T19, S19j Pro, S19j, S19A Pro.
🚫 No: Hydro, XP, i, +, (no pic) miners with PSU: APW121417, APW121215 defg.
Control boards C87, C84, C77 (BB), C71, C55, C52, C49. Only slots 0,1,2.
🚫 No: C78, C76 (Amlogic), C74.
-
2023-01-06 15:33:41+00:00
OK, so when I get the unit, I will have to check the control board and psu to see if they fall in the support?
-
2023-01-06 15:32:50+00:00
currently not "all" x19 miners work, it depends
-
2023-01-06 15:32:48+00:00
Great to hear
-
2023-01-06 15:32:27+00:00
work is in progress for the XP
-
2023-01-06 15:32:19+00:00
And am looking at some S19j pro as well
-
2023-01-06 15:32:10+00:00
ok then not yet
-
2023-01-06 15:32:00+00:00
I have s19 XP on order
-
2023-01-06 15:31:26+00:00
What miner and control board and psu you have?
-
2023-01-06 15:31:18+00:00
Except for XP
-
2023-01-06 15:31:05+00:00
But I understand that is now supported, correct?
-
2023-01-06 15:30:40+00:00
Note, the docs still don't mention s19 support
-
2023-01-06 15:30:15+00:00
I am reading the docs now
-
2023-01-06 15:29:46+00:00
Apologies, I didn't see that in the previous reply
-
2023-01-06 15:28:01+00:00
I suggest power target as it tends to be a little more efficient, but either is possible.
-
2023-01-06 15:26:56+00:00
yeah like said before (no bbb)
-
2023-01-06 15:18:49+00:00
Can I target hashrate based on time of day to achieve a similar result? So during my cheap rate time I would be full out, but at higher rate, scale down hash to minimal, but keep running
-
2023-01-06 15:13:27+00:00
Oh wow, I see so it's not quick
-
2023-01-06 15:12:55+00:00
For example the ramp up/down in Braiins Pool takes 90 minutes so you should stay longer than that...
-
2023-01-06 15:11:19+00:00
for normal curtailment i don't think so, it is the frequent hopping that does
-
2023-01-06 15:10:56+00:00
Would turning on and off based on time of day cause issue with the mining pool similar to hopping?
-
2023-01-06 15:10:12+00:00
BeagleBone Black one of the control board types.
-
2023-01-06 15:09:55+00:00
What is BBB?
-
2023-01-06 15:08:48+00:00
or you can use your own router to schedule it as many have a function to restrict "internet hours"
-
2023-01-06 15:08:08+00:00
yes its possible, except with bbb with those you would need to do it from an external device
-
2023-01-06 15:04:31+00:00
I see, thanks. How about starting and stopping a miner during the day based on time of day, to match lower power rates?
-
2023-01-06 14:54:55+00:00
if you add groups you will split the hashrate among them, there is no rotation possible, and you don't want to come in and out of pools regularly anyway. All pools implement some form of anti pool hopping so it will be worse to constantly join/leave than sending half hashrate to each.
-
2023-01-06 14:51:01+00:00
What about the second part of the question, can I rotate them automatically, for example, during specific time of day, point to this pool or group, and then switch
-
2023-01-06 14:49:58+00:00
yes
-
2023-01-06 14:49:34+00:00
Ok and then you can proportion a percentage to each?
-
2023-01-06 14:46:43+00:00
Just add more groups
-
2023-01-06 14:46:17+00:00
Hi All, is it possible to point one s19 to multiple pools, or to automatically rotate through different pools?
-
2023-01-06 06:00:37+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-06 02:01:33+00:00
I think that'd be pretty slick
-
2023-01-06 02:01:25+00:00
Has anyone considered making a FarmProxy app for Umbrel?
-
2023-01-06 01:17:22+00:00
Yes I can send over. It’s running stock firmware, what would the braiins support file look like/where would I find it. Thanks again,
-
2023-01-05 23:59:47+00:00
These
-
2023-01-05 23:53:08+00:00
Can you please share the logs of the stock firmware over DM, and if is possible the Braiins support file ?
-
2023-01-05 23:49:40+00:00
In the dashboard it lists # of chips as 100 per board.
-
2023-01-05 23:48:39+00:00
That’s the only sticker I’m seeing other than the one with the serial number.
-
2023-01-08 22:31:09+00:00
Thanks
-
2023-01-08 21:05:30+00:00
No, i run my S17pro with 900w and i get best th/w
-
2023-01-08 19:02:26+00:00
Best was:
S17+ doing 53TH/s 1537W (29 J/T) 65°C -- Bas Laurier
-
2023-01-08 17:46:20+00:00
900
-
2023-01-08 06:00:39+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-08 03:46:37+00:00
Hi guys!!! What is the best efficiency for your tuning with Antminer s17 Pro ? Which is your wattage !?
-
2023-01-08 01:56:02+00:00
For others having this issue, you need to download the file in a normal Google Chrome window (Not Incognito) you don't need a Google Account.
-
2023-01-08 01:55:59+00:00
I just flashed Braiins is firmware on s17pro and it running fine
-
2023-01-08 01:51:46+00:00
That what I got in the SD card right now
-
2023-01-08 01:50:16+00:00
Ok, for that one you need to use this I age to flash the SD
http://feeds.braiins-os.com/22.08.1/braiins-os_am2-s17_sd_2022-09-27-0-26ba61b9-22.08.1-plus.img
-
2023-01-08 01:46:35+00:00
Can you send a photo of the psu sticker ?
-
2023-01-08 01:42:29+00:00
I know it is not BeagleBone but I don’t know about psu.
-
2023-01-08 01:40:10+00:00
What control board and PSU have the device ?
-
2023-01-08 01:25:25+00:00
Need help with installing Braiins os+ with s19 SD Card. When inserted SD card (flashed ) nothing happens.
-
2023-01-07 20:41:35+00:00
Okay will do, thanks
-
2023-01-07 18:48:26+00:00
You need to update to the latest Braiins OS+ version or change the urls to slushpool ones
-
2023-01-07 17:37:37+00:00
Hello, I’ve noticed the last few days for some found blocks I have not received a Braiins OS+ mining bonus. All of my miners are running Braiins OS+ and mining to the stratumV2 pool on braiins pool.
-
2023-01-07 16:28:58+00:00
Sounds like something server side, I submitted a ticket. Thanks for the reply
-
2023-01-07 16:24:26+00:00
Noticed this on Apple device as well. Emails still work however
-
2023-01-07 15:47:59+00:00
Please use our Help Center and open a support ticket for all the pool related questions.
-
2023-01-07 15:44:48+00:00
Anyone else notice the Braiins app (android) suddenly stop sending notifications?
-
2023-01-07 13:43:53+00:00
Is it possible to take in an external temperature and throttle based on that?
-
2023-01-07 06:00:03+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-07 03:53:05+00:00
Thank you
-
2023-01-07 03:53:05+00:00
Depends on the model you can install into the NAND or Uninstall
-
2023-01-07 03:52:41+00:00
No, use the IMG file
-
2023-01-07 03:52:16+00:00
When flashing braiins to an sd card, do I use the .asc file? The zip folder for s19 contains that and another file
-
2023-01-07 00:44:33+00:00
Just ran the bos-toolbox. Now what?
-
2023-01-07 00:20:17+00:00
https://t.me/BraiinsOS/141131
-
2023-01-07 00:17:07+00:00
Are there any hashrate/watt ratios that you are aware of that you can tell me?
-
2023-01-12 22:09:39+00:00
needs to be from the SD card at all times
-
2023-01-12 22:04:01+00:00
so sorry, just to confirm the other models have to run braiins off the sd? can't use the BOS network tool?
-
2023-01-12 22:03:08+00:00
anytime
-
2023-01-12 22:02:21+00:00
thanks
-
2023-01-12 22:01:19+00:00
yes
-
2023-01-12 22:01:09+00:00
thanks. The amLogic is the microUSB one ya?
-
2023-01-12 22:00:03+00:00
at this momento only on BBB and xilinx are supported, with AMLogic the test is on progress and because it doesn't have SD slot, its going to be different
-
2023-01-12 21:57:33+00:00
Am I correct in my research that an s19jPro can only run braiinsOS+ from the SD card no matter which of the 3 different boards it has?
-
2023-01-12 18:58:40+00:00
What do you mean?
-
2023-01-12 13:06:08+00:00
With the BOS-Toolbox, when scanned and get the info rom the miners. It doesn't show the Default watts or TH. Is that something that can be fixed to do that?
-
2023-01-12 06:00:01+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-11 17:44:50+00:00
🥲
-
2023-01-11 17:43:57+00:00
I understand. Thank you for your reply.
-
2023-01-11 17:43:51+00:00
Its not supported yet
-
2023-01-11 17:43:41+00:00
Ahh then need to wait
-
2023-01-11 17:43:37+00:00
Not supported yet
-
2023-01-11 17:42:58+00:00
It’s APW121417
-
2023-01-11 17:39:24+00:00
Let me check and get right back to you in 1 minute
-
2023-01-11 17:38:57+00:00
You may have an incompatible miner, can you please share the PSU label?
-
2023-01-11 17:38:00+00:00
2023-01-11T17:26:10.069967Z WARN bosminer_plus_tuner: Model detection failed, you can possibly use 'Antminer S17' model when 'use_config_fallback = true' is set in '[model_detection]' section of '/etc/bosminer.toml'
2023-01-11T17:26:10.071555Z ERROR bosminer_plus_tuner: Error: incorrect configuration body: Failed to load bosminer model No such file or directory (os error 2)
2023-01-11T17:26:15.092141Z INFO bosminer_plus_tuner: Detected architecture Antminer X17/X19
2023-01-11T17:26:15.167527Z WARN bosminer_plus_tuner: Failed to find model: unknown miner model 'Antminer X17', using default descriptor Antminer S17
-
2023-01-11 17:37:55+00:00
Good day. I have a problem. I changed the AM Logic control board of an S19 with a Xilinx one in order to install Brain OS+. Brain OS+ is loading from the SD just fine BUT it detects the model as S17. It's also not hashing at all. Below is from the log.
-
2023-01-11 15:20:12+00:00
Sorry you’re right.
-
2023-01-11 15:19:41+00:00
please stay on topic, this is only for Braiins OS+ support
-
2023-01-11 15:14:29+00:00
Thanks, appreciate that. Does anybody know then how to read those temperature numbers in the antminer software?
-
2023-01-11 12:09:46+00:00
** Braiins OS+ works with: **
Bitmain Antminer S9, S9j, S9i.
🚫 No: Hydro, K, SE; dual/pro mod.
Control board C41. Only slots 6,7,8.
🚫 No: C92 (T9+), C32 (Cyclone), C5 (BB).
⚠️ Unsupported: T9+, R4 (C41 only), no temps, 1200W max.
Bitmain Antminer S17, S17 Pro, S17+, S17e; T17, T17+, T17e.
Control boards C52, C49. Only slots 0,1,2.
🚫 No: Aftermarket (not Bitmain) control boards.
Bitmain Antminer S19, S19 Pro, T19, S19j Pro, S19j, S19A Pro.
🚫 No: Hydro, XP, i, +, (no pic) miners with PSU: APW121417, APW121215 defg.
Control boards C87, C84, C77 (BB), C71, C55, C52, C49. Only slots 0,1,2.
🚫 No: C78, C76 (Amlogic), C74.
-
2023-01-11 12:08:56+00:00
It’s not supported at this moment, the devs are working to support it, but not ETA for now
-
2023-01-11 12:00:42+00:00
Or any experiences related to this problem?
Thanks in advance ⛏⛏⚡️
-
2023-01-11 11:59:24+00:00
Hi 🙋♂️
Recently got a s19 hydro. Braiins OS doesn’t work on it. Any solutions for that?
-
2023-01-11 06:00:40+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-10 18:45:04+00:00
Ok thank you.
-
2023-01-10 18:44:24+00:00
correct, it works with 114 chip hashboards
-
2023-01-10 18:43:32+00:00
Ok so no options currently available to run braiins atm?
-
2023-01-10 18:41:43+00:00
100 chip is currently not working
-
2023-01-10 18:41:11+00:00
So is the zynq compatible with this 100 chip/HB or should I check too see which controller it has first?
-
2023-01-10 18:39:36+00:00
alright thanks for your help
-
2023-01-10 18:39:04+00:00
yes
-
2023-01-10 18:38:52+00:00
okay I was hoping that was the case. So if my A psu went bad, and I have a spare C, that should be okay?
-
2023-01-10 18:38:18+00:00
second
-
2023-01-10 18:37:53+00:00
yes to which? sorry
-
2023-01-10 18:37:29+00:00
yes
-
2023-01-10 18:35:49+00:00
If I wanted to swap PSUs on an S19J Pro running Braiins, does it have to be the same version? So A for A, B for B? or will A, B, and C all work for each other, with D, E, and F being the outliers?
-
2023-01-10 18:32:57+00:00
100 chips per board...
-
2023-01-10 16:59:21+00:00
I know. I'm not at it's location and I don't have remote access. I'll let you guys know soon.
-
2023-01-10 16:58:13+00:00
you can see it in the miner's web page running factory firmware
-
2023-01-10 16:57:52+00:00
Sorry already forgot about the chip count 🫠... I don't remember what it came with... I'll head over and look first.
-
2023-01-10 16:56:26+00:00
Your miner has 114 chips on each HB ?
-
2023-01-10 16:56:15+00:00
I would advise getting a Zynq instead, what did it came with? AmLogic?
-
2023-01-10 16:55:15+00:00
Nice... gonna order now... this comes with the BB and the IO board correct? As pictured?
-
2023-01-10 16:53:42+00:00
yup, miners that came with b should work
-
2023-01-10 16:53:20+00:00
Poor photos sent through sms.... so revision b will work?
-
2023-01-10 16:52:50+00:00
looks good
-
2023-01-10 16:52:41+00:00
😔
-
2023-01-10 16:50:13+00:00
Model rev/ver
-
2023-01-10 16:49:48+00:00
Ok, 114 chips then BB + Braiins should work... what I'm I looking for on the PSU?
-
2023-01-10 16:48:16+00:00
Looking forward to it
-
2023-01-10 16:48:05+00:00
of course, but its still work in progress.
-
2023-01-10 16:47:45+00:00
Is that update due to a upcoming new braiins fw version?
-
2023-01-10 16:47:18+00:00
ok, when you know how many, let us know to see if its supported to use Braiins OS+
-
2023-01-10 16:47:04+00:00
That is about to be updated but yea in theory the S19A Pro with 114 chips per hashboard should work. You need to inspect the PSU it came with just in case
-
2023-01-10 16:46:31+00:00
I'll have to log in again and check, it's not at my current location.
-
2023-01-10 16:45:45+00:00
Check this compatibility list
-
2023-01-10 16:45:12+00:00
how many chips that device has on each hashboard ?
-
2023-01-10 16:45:03+00:00
Probably not , don't think your s19a pro is compatible with braiins fw
-
2023-01-10 16:42:18+00:00
https://altairtech.io/product/bitmain-antminer-s19j-s19j-pro-beaglebone-control-board-sdc/
Hello all. Could I use this as a direct replacement on a S19a pro 110th so I can run braiins?
-
2023-01-10 14:51:41+00:00
if you have another to test it, would be better to troubleshooting
-
2023-01-10 14:50:55+00:00
I did that. One of the fans on the psu isn't spinning, could it be the PSU?
-
2023-01-10 14:48:45+00:00
check the power cables, data cables and sometimes its because some screws are not tight as should it be
-
2023-01-10 14:46:58+00:00
My braiins os on my T17e antminer shows a "short circuit" error and hashboards won't mine. What do I need to replace, control board or PSU?
-
2023-01-10 09:25:19+00:00
Send me your ticket ID in private message please.
-
2023-01-10 09:24:14+00:00
I opend a ticket but they don't "look deeper". They don't asked for any files.
-
2023-01-10 09:05:18+00:00
When we mention your ends it is not exactly you, It is your internet provider :) and to make sure about all the possibilities we are asking support archive file
-
2023-01-10 09:02:48+00:00
I got missing rewards on every single page of my reward history since 3 weeks. Before that it runs perfect since I started a half year ago. Please stop gaslighting the user that he is causing the problem.
-
2023-01-10 08:55:26+00:00
@locherulm I also remember the issue fixed for you after some blocks, I guess the internet provider or some router on the way is blocking some ports or other issue.
-
2023-01-10 08:52:55+00:00
The issue can be anywhere on network from your end to our servers, please open a support ticket with attached support file to looking into it deeper 👍🏼
-
2023-01-10 08:51:06+00:00
Anyone got the same problem in last few days? No reward from time to time for using Braiins OS+! Of cause I am using 22.08.1 with Braiins ULRs.
-
2023-01-10 06:00:47+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-10 03:42:51+00:00
Got it
-
2023-01-10 03:32:33+00:00
Is the target hashrate feature not available for S9? Toggle isn’t working
-
2023-01-09 20:33:47+00:00
Anyone in here using an S17 pro? Curious to know what wattage you are using on braiins os? I'm not using the target hashrate feature in braiins I'm trying to dial in a good power target
-
2023-01-09 19:18:52+00:00
okay will do..
-
2023-01-09 19:18:05+00:00
This group is for Braiins OS+ only, if you have any pool questions, please go to the pool and open a ticket there.
-
2023-01-09 19:13:07+00:00
You have an interesting question, But we don't have apps for Braiins OS+. Please stay on topic of this group.
-
2023-01-09 19:10:55+00:00
the app features are all view only.... unless i am mistaken
-
2023-01-09 19:10:18+00:00
and thats it 😁
-
2023-01-09 19:09:59+00:00
they download the app on an android device and scan the code
-
2023-01-09 19:09:30+00:00
Just looked and it seems easy... i just need to share the qr code with my friend
-
2023-01-09 18:49:02+00:00
Maybe with a different login
-
2023-01-09 18:48:04+00:00
If not, is it possible / safe to allow a friend to download the app and monitor my miner?
-
2023-01-09 18:43:41+00:00
Is this app open source?
-
2023-01-09 18:43:27+00:00
I have a question about the android app...
-
2023-01-09 16:13:01+00:00
SSH Tunneling, proxy, VPN, etc are fine
-
2023-01-09 16:12:35+00:00
I would just be using it with a self-signed cert more than likely. Getting proper one wouldn't be worth it, mainly just looking for the traffic local or not, to be encrypted. To your point, doesn't scale well and could create more issues
-
2023-01-09 16:10:24+00:00
Highly unlikely. I could see support for someone adding it, but it’s generally not very useful at scale, and maintaining it is a pain. You have to refresh your SSL certificate every so often to keep it in date, and if you don’t it causes more issues.
-
2023-01-09 16:09:07+00:00
Any change this will be implemented in a future version? I assume low priority for stuff like this
-
2023-01-09 16:07:43+00:00
Thank you for confirming. And yeah that's what I'm doing right now VPN method for remote access
-
2023-01-09 16:07:05+00:00
Currently not possible. Try making a vpn instead or use some other method like ssh tunneling, proxy, etc.
-
2023-01-09 16:02:17+00:00
using S9 miner. Not sure if anyone else has tried this before
-
2023-01-09 16:01:50+00:00
Is there any way to force Braiins to be behind HTTPS on the GUI?
-
2023-01-09 12:10:04+00:00
It’s on the final tests, but no ETA for now
-
2023-01-09 12:09:01+00:00
I heard there was a solution for Amlogic boards in the works… any progress?
-
2023-01-09 09:23:03+00:00
Thank you so much!
-
2023-01-09 09:22:28+00:00
** Braiins OS+ works with: **
Bitmain Antminer S9, S9j, S9i.
🚫 No: Hydro, K, SE; dual/pro mod.
Control board C41. Only slots 6,7,8.
🚫 No: C92 (T9+), C32 (Cyclone), C5 (BB).
⚠️ Unsupported: T9+, R4 (C41 only), no temps, 1200W max.
Bitmain Antminer S17, S17 Pro, S17+, S17e; T17, T17+, T17e.
Control boards C52, C49. Only slots 0,1,2.
🚫 No: Aftermarket (not Bitmain) control boards.
Bitmain Antminer S19, S19 Pro, T19, S19j Pro, S19j, S19A Pro.
🚫 No: Hydro, XP, i, +, (no pic) miners with PSU: APW121417, APW121215 defg.
Control boards C87, C84, C77 (BB), C71, C55, C52, C49. Only slots 0,1,2.
🚫 No: C78, C76 (Amlogic), C74.
-
2023-01-09 09:22:07+00:00
But we still might install to s19 with sd card right?
-
2023-01-09 09:21:15+00:00
Hi, Not at this moment, maybe in future
-
2023-01-09 09:20:19+00:00
Hello all, I wondering that could we install braiins os on to s19 XP hydro?
-
2023-01-09 08:31:52+00:00
Thank you for sharing performance on 1.25kw 🙂
-
2023-01-09 08:30:30+00:00
Fans will go 100% while tuning. Will go down after tuning
-
2023-01-09 08:22:54+00:00
I couldn't figure out how to bring the noise down using auto tune, so I tinkered with setting manually and with fixed voltage and target temps on the boards, I'm pulling around 1.25KW, getting 34-38TH/s and 34ish W/THs. Fans now run between 15-20% automanaged to maintain temp.
-
2023-01-09 06:00:02+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-09 00:36:13+00:00
On 1300w I get 31.3 th/s (41.5 J/T)
-
2023-01-09 00:34:16+00:00
With t17 min power target say 1157w, why?
-
2023-01-14 21:30:33+00:00
Report is very helpful thank you!
-
2023-01-14 21:28:40+00:00
Great thank you
-
2023-01-14 21:27:06+00:00
https://t.me/BraiinsOS/141131
SD card should be as long in your asic as long you want to run BraiinsOS+
-
2023-01-14 21:08:22+00:00
like 24 hours. Sd Card remains in.
-
2023-01-14 20:00:30+00:00
Just started OS+ on my 19jpro bbb. How long does tuning usually take and when do I remove the sd card (if ever)?
Any tips on performance settings? I want max hash over efficiency
-
2023-01-14 18:33:10+00:00
Possible solution: Use a lower target temperature.
-
2023-01-14 18:32:31+00:00
It has the brand that likes to spin to full when told to 0%, that is why.
-
2023-01-14 18:29:48+00:00
Unrelated. Its just too cold.
-
2023-01-14 18:29:22+00:00
And why 0%? Are you turned immersion mode?
-
2023-01-14 18:29:02+00:00
Seems issue with fan
-
2023-01-14 17:58:58+00:00
good day, please help me. what happened here? i lost my internet connection for 24hrs, and now don't show me the rpm of the fan
-
2023-01-14 14:33:38+00:00
There are no limits to the number of groups you can add, and the number of pools within each group.
-
2023-01-14 14:31:10+00:00
You can split hashrate between pools, its not called "hotel" its called groups. And its NOT hidden.
-
2023-01-14 14:27:30+00:00
Does BOS have a hotel fee feature? Split hashrate between pools?
-
2023-01-14 12:58:17+00:00
Ok
-
2023-01-14 12:58:05+00:00
Change your device to S9J :)
-
2023-01-14 12:57:31+00:00
You have suggestion?
-
2023-01-14 12:57:16+00:00
Damn
-
2023-01-14 12:57:13+00:00
Ow ok
-
2023-01-14 12:55:55+00:00
Hi, S9K is not supported by Braiins OS+
-
2023-01-14 12:50:15+00:00
Help
-
2023-01-14 12:50:11+00:00
No signature
-
2023-01-14 12:49:58+00:00
Can noy upgrad3 my s9k to brainos+
-
2023-01-14 12:49:07+00:00
Reset s9
-
2023-01-14 12:48:48+00:00
Signature
-
2023-01-14 11:10:19+00:00
Sure it needs some coding skill
-
2023-01-14 11:09:49+00:00
Api
-
2023-01-14 11:07:30+00:00
Which one? Scheduled tasks or API?
-
2023-01-14 11:06:42+00:00
I had a look, seems like its not that straightforward to implement that functionality.
-
2023-01-14 08:25:53+00:00
Thanks Behzad, I will have a look into the API.
-
2023-01-14 08:22:50+00:00
You can do it by scheduled tasks during the daytime, or if you are familiar with scripting you can use API to build your desired automation
-
2023-01-14 08:21:27+00:00
Hello, I plan to use an antminer to use my solar excess power. Is there a way to dynamically set the power consumption of the antminer using braiins os?
-
2023-01-14 06:00:33+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-14 04:09:02+00:00
Do/will you support the new S19 122Th?
-
2023-01-14 01:55:18+00:00
Any help here? I did finally got visibility of the miner, but the OS still doesn’t see it as a worker. Does it take long to auto tune? Seems like that’s what it’s doing now
-
2023-01-14 00:35:45+00:00
Yes, also work in progress
-
2023-01-14 00:35:14+00:00
Are there plans to develop firmware for the hydro Antminer models?
-
2023-01-14 00:33:55+00:00
ok
-
2023-01-14 00:33:53+00:00
ok. this still?
-
2023-01-14 00:33:13+00:00
Its not released yet.
-
2023-01-14 00:32:09+00:00
Which version of the autotuning would you use on an s19 with amlogic board
-
2023-01-13 23:34:54+00:00
** SD method **
- Download the image for the micro SD (max 16g):
S9, S9j, S9i (no k, se, hydro, Pro/Dual, C5, C32, C92);
x17 (all) / x19 (no I, +, hydro, xp, Amlogic, C74, C78, aftermarket, APW121417, APW121215 defg).
x19 with Beagle Bone Black control board.
- Flash the image from a pc with BalenaEtcher, Rufus or dd.
- Insert the micro SD card and reboot the miner.
(S9 only) move jumper jp4 as shown in the picture.
- Log into the miner with a web browser: user root, no password.
You can find its IP with bos-toolbox listen + ip report button, or AngryIP / Nmap.
— — — — — — — — — —
(Optional) Install to NAND from (System > Status >) System > Install to NAND (Not with C87, C84, C71, C55, bbb).
-
2023-01-13 23:34:15+00:00
Yes 👇
-
2023-01-15 18:57:52+00:00
Yes for sue e
-
2023-01-15 17:12:06+00:00
Perfect. Unfortunately the vendor I work with, is a drop shipper, and they never see the boxes, so I need to really give the best info to help them make sure I have a shot. I'll share what you gave me and opt for s19j Pro 104s and see if her source can verify the PSU stickers
-
2023-01-15 17:05:25+00:00
but the ideal is to check the PSU sticker that comes with the miner, and the control board.
-
2023-01-15 17:04:38+00:00
aim for the highest speed models, because those are earlier. Eg: S19j Pro 104
-
2023-01-15 17:04:06+00:00
Great to know. So, used inventory would be most likely have a better shot than new old stock.
-
2023-01-15 16:59:04+00:00
Miners that came with the OLD ones work, NEW ones don't. APW12 is the oldest, followed by APW121215abc. The earliest S19 Pro 110 with APW12 works for sure, and some others that came later, but not the latest miners that come with APW121215defg or APW121417(any). A future release will support those.
-
2023-01-15 16:56:45+00:00
It’s on the PSU sticker, and you can search it like “old” ones, but verify with the PSU sticker to be exact and also control boards BBB or Xilinx ( with SD slot )
-
2023-01-15 16:55:24+00:00
That's a super good tip!! Is there a generation or time frame those were produced? If I'm buying from a vendor and unable to verify for myself, do you know how I can tell the vendor how to identify those particular PSUs?
-
2023-01-15 16:32:24+00:00
not yet, still work in progress
-
2023-01-15 16:29:37+00:00
Is there a beta download for the m20s available yet?
-
2023-01-15 16:09:42+00:00
Hello…does somebody knows the max rpm speed of the power supply coling fan of antminer s9?
-
2023-01-15 13:36:40+00:00
You need to check the PSU on those devices, needs to be APW121215 version a, b or c
Those are the ones that Braiins OS+ supports for now
-
2023-01-15 13:24:21+00:00
So many models, hard to known what is overclockable and efficient. It's looking like the s19j pro 100 might be a sweet spot, but not sure.
-
2023-01-15 13:22:44+00:00
Morning all. I was getting ready to buy a batch of s19s. What would you say the best model is if my goal is to most efficiently over clock them using braiins to 3850 watts.
-
2023-01-15 10:41:20+00:00
Immersion ?
-
2023-01-15 09:35:37+00:00
Thank you for help one last question. Is it possible to cap the power used “irrelevant of what is true power”when running brains
-
2023-01-15 09:02:42+00:00
ok
-
2023-01-15 09:02:26+00:00
It doesn’t pull, if you measure the power consumption it should be 200w lesser than what it shows in GUI
-
2023-01-15 09:01:21+00:00
but its not possible to make the the machine not pull more power than the target set?
-
2023-01-15 09:00:20+00:00
ok
-
2023-01-15 09:00:09+00:00
As I mentioned above the power consumption on GUI is not accurate for x19, you have to measure it at wall
-
2023-01-15 08:59:56+00:00
i set power target to 3500 but seems its pulling more
-
2023-01-15 08:51:28+00:00
Try default first, so measured it at wall, the first measure how much "default value" really uses, then try slightly increase it and verify again at the wall. It's best to test limits by increasing and decreasing small steps. It is important to try to keep the same (low) temperature during both autotuning and normal operation, this produces the best efficiency. Small steps also give you time to test the efficiency of your cooling system.
-
2023-01-15 08:50:21+00:00
It is the logic for Power Target, autotune will try to keep device on that limit. The GUI can be not accurate so you can verify it by measuring it at wall.
-
2023-01-15 08:40:13+00:00
thanks
-
2023-01-15 08:40:10+00:00
hi im running a s19 pro 110. was wondering if i set my power target to 3500w will that prevent the machine pulling more than that? If not is this possible to do ?
-
2023-01-15 06:00:42+00:00
For all Braiins OS+ issues, please open a ticket attaching the support file as shown in the picture, so that all incidents are recorded in our system and we can take future actions. Thank you!
-
2023-01-15 03:55:37+00:00
The autotuning is being improved for those extreme uses, it should be coming in a future release. Are you using the Gullpower?
-
2023-01-15 02:35:53+00:00
110
-
2023-01-15 02:28:47+00:00
Hi there. I have an S9 that I'm running bOS on. i had restored to stock firmware at one point and then am attempting to restore to bos. had to do SD card bc webtool did not work. have tried to permanently flash nand but that is not working either and keeps reverting to stock firmware if I remove SD card
-
2023-01-15 01:30:13+00:00
which model ?
-
2023-01-17 00:05:05+00:00
Yeah but it marks the error in Red
-
2023-01-17 22:27:49+00:00
try with this image to flash the SD and after the installation is successful on NAND, you can update with bos-toolbox to the 22.08 and then to the latest
http://feeds.braiins-os.com/22.05/braiins-os_am1-s9_sd_2022-06-20-0-288861e4-22.05-plus.img
-
2023-01-18 22:41:50+00:00
If you have any 277V PSUs that would be nice
-
2023-01-19 23:10:48+00:00
Feel free to dm if you want me to add yours
-
2023-01-20 17:41:56+00:00
Or use some other method to silence the miner like a wood box, silent fans, insulated ducts, inline fan, etc.
-
2023-01-21 19:30:51+00:00
like factory
-
2023-01-22 21:50:30+00:00
Leave the temps values on default values, save and apply
-
2023-01-24 00:19:42+00:00
I swear sometimes it would just be easier to compile an EXE that runs that script and that’s it 😂
-
2023-01-24 23:24:28+00:00
delete that bos-toolbox folder and try with this one
http://feeds.braiins-os.com/toolbox/1.10.0/bos-toolbox.zip
-
2023-01-26 18:48:49+00:00
Thank you
-
2023-01-27 17:56:17+00:00
The stock fw is detecting a faulty temp sensor on the inlet side but braiins doesn't show any issues. Was wondering if braiins is just ignoring the one that's faulty and showing correct temp of other inlet sensor.
-
2023-01-28 23:09:09+00:00
Its just another way of getting info from the miner. And executing some actions. Often used by 3rd party tools.
-
2023-01-29 22:02:18+00:00
Yeah it won’t boot
-
2023-01-30 21:32:13+00:00
Bummer, thanks.
-
2023-01-31 20:45:58+00:00
I sent my fork of that lib above, the one in the article is way out of date.